HARRIS 15 BARE & HARRIS 15 FC
Low fuming bronze alloy for torch
Procedure:Clean braze areaRemove all rust, oil and greaseHeavy sections should be beveledThe alloy should applied by a brazing technique with a neutral flameWhen applying the bare rod, use a neutral flame with HARRIS 600 fluxFlux residue should be removed by wire brushing with hot water
Features:Tensile strength - Up to 65,000 psiBrazing temperature range - 1670°F to 1750°FFlux coating provides excellent wetting action with no objectionable fumingPorosity-free depositsGood machinabilityColor matches yellow brasses
Packaging:
Bare
50 lb. bulk cartons
Flux Coated5 lb. tubes, 4 tubes per carton10 lb. tubes, 5 tubes per carton
|
HARRIS 17 BARE & 17 FC
A thin flowing, high strength, brazing alloy for all ferrous and nonferrous metals (except the white metals)
Procedure:Clean braze areaHARRIS 17 is usually used for a butt joint with little preparation except cleaning and grinding the surfaceBevel heavier sectionsUse a neutral flameHold the flame cone close to the joining areaUse WELCO 17 fluxRemove flux residue with a wire brush and hot water
Features:
Tensile strength - Up to 95,000 psiSolidus - 1690°FLiquidus - 1715°FColor - Silvery
Packaging:
5 lb. tubes, 4 tubes per carton
|
HARRIS 170 BARE & 170 FC
Nickel silver brazing alloy
Procedure:
Clean the area to be brazedNo preparation other than cleaning is required if the thickness is 1/8” or lessA butt joint only is neededBevel heavier sections approximately 15°Use WELCO 17 fluxUse a neutral flameRemove flux residue by wire brushing with hot water
Features:
Tensile strength - Up to 95,000 psiBrazing temperature range - 1720°F to 1800°FUses substantially less filler material than a regular brazing rod
Packaging:
Bare
50 lb. bulk cartons
Flux Coated
10 lb. tubes, 4 per carton
|
HARRIS 40FC
Bronze alloy for torch
Procedure:
Clean joint area if possible
Rusty steels can be joined without cleaning
Bevel heavier sections
Use a neutral flame
Apply alloy with a normal brazing technique
Remove flux residue with a wire brush and hot water
Features:
Tensile strength - Up to 65,000 psi
Solidus - 1590ºF
Liquidus - 1630ºF
Color matches yellow brasses
Excellent machinability
Packaging:
5 lb. tubes, 4 tubes per carton
|
4501 Quality Place