Détails
Al-Braze® 1070 est un métal d’apport de brasage aluminium-silicium sans cadmium conçu pour le brasage à la flamme d’aluminium sur aluminium. Sa formule est faite pour fondre en dessous du point de fusion des métaux de base en aluminium brasables et sa plage de fusion étroite permet un écoulement rapide dans le capillaire. Le kit comprend un alliage de 1/6 po de diamètre et 1/3 oz de flux de brasage Al-Braze EC. Conforme à la directive européenne Reach & RoHS.
Traits
- Métal d'apport de brasage aluminium-silicium sans cadmium
- À écoulement libre avec une excellente attraction capillaire en raison de sa plage de fusion étroite
- Excellente ductilité et pénétration
- Fond en dessous du point de fusion des métaux de base en aluminium brasables
- Excellente résistance à la corrosion
- Ideal for joining aluminum-to-aluminum.
- Not recommended for brazing aluminum directly to non-aluminum alloys as the joint may become brittle
- Complies with the EU Reach & RoHS directive
- The kit includes 1/16 in. (1.6 mm) 4047 aluminum brazing wire, 1/3 oz. (9.5 g) Al-Braze® EC brazing flux
Disclaimers
Warranty Information
- 1 Year
Ce qui est inclu
- Al-Braze® 1070 aluminum brazing alloy kit: 1/16 in. (1.6 mm) 4047 aluminum brazing wire
- 1/3 oz. (9.5 g) Al-Braze® EC brazing flux
Caractéristiques
Consumables
| Alloy Type | Aluminum Brazing |
| Brazing Temperature Range | 1080°F - 1120°F (582°C - 604°C) |
| Chemical Composition | Silicon 12% Aluminum 88% |
| Classification | Wire: AWS A5.8 BAISi-4 ISO 17672 Al 112 ISO 17572 Al 112 Flux: Manufactured to Harris Products Group engineering standards |
| Diameter | Kit - 1/16 in. (1.59 mm) wire |
| Liquidus | 1080°F (582°C) |
| Material | Aluminum |
| NSF Compliant | No |
| Recommended Flux | Al-Braze® EC flux. The flux is a powder and can be mixed with water to form a paste. Use a brush to apply paste flux to the assembly. It also can be sprinkled on the part. With this approach heat indirectly until flux liquefies. An alternate method is to heat the wire end with the flame and dip it into the flux powder. The flux will adhere to the heated wire and the flame can be used to melt flux from the wire onto the part. |
| RoHS Compliant | Yes |
| Size | 1 ea. jar |
| Solidus | 1070°F (577°C) |
| Special Instructions | Flux is hygroscopic and will absorb moisture. Keep container tightly closed. |
| Typical Application | Flame brazing aluminum-to-aluminum |
Warranty
| Warranty | 1 Year |