LOW FUMING BRONZE BARE WELDING ALLOY

Diameters / Packaging

Diameters
4 lb Box
10 lb Box
20 lb Box
50 lb Box
1/4 in (6.4 mm) 00015910 0001590
1/8 in (3.2 mm) 00015600POP 00015610 00015605POP 0001560
1/16 in (1.6 mm) 00015300POP 00015310 0001530
3/8 in (9.5 mm) 00015A0
3/16 in (4.8 mm) 00015810 00015805POP 0001580
3/32 in (2.4 mm) 00015500POP 00015510 00015505POP 0001550
5/16 in (7.9 mm) 0001595
5/32 in (4.0 mm) 0001570

Harris® 15 Low-Fuming Bronze Bare Brazing Alloy

00015810

Harris® 15 low-fuming bronze bare brazing alloy 3/16 x 36 in. x 10 lb. box

DETAILS

Harris® 15 low fuming bronze (LFB) bare is considered a “braze-welding” alloy as this copper/zinc alloy exhibits minimal capillary action during brazing. This limits joint design primarily to lap, tee, and butt joints. Butt joints require some edge preparation typically incorporating beveled edges to provide a location for filler metal to be applied and to ensure alloy penetration to the joint root. LFB was developed primarily to braze steel and some cast iron grades including malleable and gray iron. It can be used to join copper but due to its elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.

Features

  • Copper-zinc braze-welding bare rod using oxy-fuel
  • Exhibits minimal capillary action during brazing
  • Limited joint designs to lap, tee and butt joints, although butt joints require some edge preparation
  • Good machinability
  • Produces porosity-free deposits
  • Good color match to brass
  • Developed to braze steel and some cast iron grades including malleable and gray iron and joining copper
  • Corrosion resistance is similar to most high zinc brass alloys. Care should be taken on service conditions where water immersion is involved as dezincification is a potential issue.

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Warranty Information

  • 1 Year

Documentation