HARRIS®® 0HP Phos-Copper Brazing Alloy

Harris 0HP phos-copper-copper brazing alloy is a low cost alloy use for many copper-to-copper applications where moderate fit-up can be maintained and brazing temperature is not critical. Conforms to the EU Reach & RoHS directive.

Zalety

• Economical choice for copper brazing
• Copper is self-fluxing
• Alloy flows quickly at brazing temperature so requires close joint tolerance (less than 0.005")
• Primarily used in manual brazing applications
• Also a suitable for brazing brass
• Operators should avoid over heating the brass and use Stay Silv® white brazing flux
• Not recommended for brazing steel or other ferrous base metals
• Should not use Harris 0HP if braze is exposed to sulfur or sulfur compounds in service
• Recommended joint clearance of .002"-.007"
• Conforms to the EU Reach & RoHS directive